Reset & Register DoorCam 2

*** VERY IMPORTANT *** Please put your phone in airplane mode and verify that your Wi-Fi setting is turned ‘ON’ and that you are connected to your 2.4GHz network before you begin. Airplane mode prevents attempted connection to the cell tower during installation.

Open the battery cover and press the Reset button for 5-10 seconds. When the red and blue LED lights flash up and down, the device has been successfully reset. You may have to do this more than once before both lights begin to blink.

Remove the device – If this is not the first time you’ve registered the device, you must remove it from the app before re-registering it. Login to the Remo+ app and tap on the ‘Account’ icon at the bottom of the home screen, then tap on the third menu item ‘Information’, then tap on the image of the device you are removing in the ‘Your Devices’ list, then tap ‘Remove’ and confirm twice

Register DoorCam 2 by tapping the ‘+’ icon at the top, right corner of the home screen.

Select DoorCam 2 and follow the on-screen instructions.

Please remember to take your phone off of airplane mode when you are finished!

DC2, DoorCam2, Two, Setup, Install, Connect, Registration, Reregister

Doorcam2, Setup, Install, Connect